Shake the paint well before use, and add it directly to the spray pen without dilution.
Spray thin layers at a pressure of 0.1MPa~0.2MPa.
After spraying, wait for about 30 minutes in a room temperature (25 ℃) environment for the paint surface to completely dry and solidify.
Note: The more layers the CG series sprays, the darker the color. You can decide on the number of layers to achieve different saturation effects.
If lighter colors are needed, the CG series can be mixed with SG.01 varnish to reduce CG saturation.
The CG series will be wiped away by alcohol or X20 solvent, and players who need to paint or infiltrate lines on the surface of the CG need to use varnish to isolate before proceeding with subsequent operations.
Step 1 of the CG series official image: The main image 1 uses MT.01 electroplated silver as a mirror base (BC.01X pure black X or SG.06 silicon-based varnish as the base) to provide a metallic reflective layer for the CG series. Afterwards, the CG series transparent color is sprayed, and finally, SG.01X varnish X or SG.06 silicon-based varnish is used to enhance the gloss of the topcoat to the mirror surface.

Step 2 of CG series official image: The main image 2 is made of MT.21 super stainless steel with a pure black base (BC.01 pure black or PM.04/06 water free glossy black primer) to provide a metallic reflective layer for the CG series. Afterwards, the CG series transparent color is sprayed, and finally, SG.01X varnish X or SG.06 silicon-based varnish is used to protect the topcoat and improve its gloss to the mirror surface.