Color Classification:
A: Extra large cup T13Ultra
B: Mini cup T13Mini
C: Lack of battery for oversized cup kit
D: The mini cup kit lacks battery
E: Sell the motherboard display board alone

Brand: yzxstudio
Model: Terminator 13
Battery type: Lithium ion battery
Maximum output power: 240W
Additional features: Multi-U port output, screen digital display, support fast charging
Whether to bring a screen: with a screen
Shell material: alloy
Size: 185x82x25mm
Cell type: cylindrical aluminum shell
Smart type: other smart
Battery capacity: 27600mAh
Whether to support wireless charging: No
Whether to bring a charging plug: No
Charging protocol: pd2.0 PD3.0 QC2.0 QC3.0 QC4.0 QC4+ VOOC FCP SCP AFC PE2.0 PE3.0 DCP sfcp BC1.2
Whether other with data cable: No
Whether to support magnetic charging: No

The new steel 13 is on sale. Extra large cups come with silicone ring + felt cover, mini cups only come with silicone ring, brush head, Bao Shunfeng.

There are too many orders and the production capacity cannot keep up. The estimated delivery time is about 2 weeks.

The difference with steel 11: the parameters and functions not mentioned are basically the same
Put the screen on the side and change to an IPS HD 1.14-inch screen. You can see the capacity without taking it out of the bag, but because the screen becomes smaller, the font is smaller, there is no protective film, and the screen is bare.
The performance is strengthened, the internal resistance of the protection board is reduced to one-third, and the power tube is upgraded again, with a continuous 200W output, which is not a peak of 200W, which is optimistic about the continuous word! The input is still 150W continuously!
The main control M0 is upgraded to M23, which reduces self-consumption while greatly increasing the computing speed
C1 upgrade full protocol fast charging hardware solution
The volume of the 13 super large cup is about 12 mm shorter than that of the steel 11 super large cup, and the width and thickness remain unchanged
Flashing optimization I made my own UART flashing adapter, support DIY boot screen, friends who took the double 11th will send a flashing head, no longer use the previous STLINK flashing
Add an additional hardware RESET hole, so you don’t need to disassemble the phone or put the light on to save the bricks and play the crash.
Large cup size: 183*92*28mm, 870 grams, 8 sections of Samsung 50E2
Mini cup size: 111*92*28mm, 490g, 4 sections of Samsung 50E2
The mini cup with 4 21700 batteries is newly added, which is compact and portable with super high performance. In addition to limiting the output of 120W to 100W, the same motherboard uses the same material.
The volume comparison is from left to right Steel 11 super large cup, steel 13 super large cup, steel 13 mini cup, and steel 12.

Welcome to choose Zhixiang Electronics YZXSTUDIO Terminator 13 high-performance power bank
New product promotion, finished host SF Express free shipping.
The felt cover shipped with the host is only to protect the host from being broken during the mailing. It is used as a buffer filling material, and the quality is poor. You can just throw it away if you don’t like it. The main reason is that the magic buckle is incorrect and may not stick. Friends who are good with needlework can use it after ordering a new one.
Look carefully and buy again↓
The performance is really awesome, and the price is also awesome. If you want to shoot, you need to be cautious about shooting. Returning is very troublesome!
The volume of the bricks is large, large and heavy. It is too big to be taken carefully, and the goods are not returned on the basis of big reasons. It is not my business to reject the delivery by express!
Some Huapu mobile phones, especially 40W and 66W mobile phones, have maliciously restricted the fast charging speed of ordinary SCP, PD and FCP, and do not support all VIV0 and IQ00 fast charging. The above mobile phones only have a slow charging speed of about 10W. Please think twice about buying. The resulting return is at your own risk for round-trip postage.

The finished host is guaranteed for 1 year, the battery is guaranteed for 1 year, the kit has no warranty, and there is no warranty for private disassembly!
All parameters on this page are for reference only, and everything is subject to the actual product.
There is no reason to return and exchange within 7 days, and the packaging must be intact and unopened for use. The buyer bears 36 yuan for the postage.
If the cycle exceeds 2 times, only the warranty will not be returned. The capacity is huge enough to test. Would you like to buy a used one?
All products are shot with 4K HD surveillance at the factory, which will affect the secondary sales and the film will not be refunded or replaced!
For any return that is not at the fault of the seller for which no reason can be given, the buyer shall bear the 36 yuan SF mailing fee, please don’t take it!

Capacity learning tutorial: fill up first! ! ! Use it up again! ! !
1: The new machine has been set up for you and skip to 2. If the new machine is finished directly, please set the capacity when the battery voltage is lower than 16v. The recommended capacity is 9.900Ah for super-large cup 50E, 6.000Ah for C6, and 6.900Ah for 35E. .
2: The full speed at any speed is subject to the purple F in the upper right corner of the screen or the automatic shutdown after full power.
3: Use about 18w of power to discharge until it is out of power and automatically shut down, try to complete step 3 discharge within 3 days.
4: The learning is completed, normal charging and discharging use.

It is convenient to get on the plane and subway, and the nameplate should be marked as follows:
Large cup 19800mAh-7.2V-143Wh
Mini cup 19800mAh-3.6V-72Wh
The capacity is not a virtual standard, but the voltage corresponding to the rated capacity has been changed.

Risk warning: The charging power of this product is huge, and it can be pulled to the limit output of the charger. It can charge 100W to a constant voltage without reducing the speed at 20 degrees at room temperature. It can squeeze the PD power supply until it is not as good as it is to die for more than 1 hour. Some garbage Power supplies, especially GaN multi-mouth biscuits, are not recommended to be used to charge this product. The probability of being crushed is very high. It is recommended to use single-port big brands (Pingguo Xiangmi Lianxiang with a brand of more than 5 years) PD power supply or big-name laptop power supply (Asus interface is just 5.5*2.5mm, keyword 19v6.32A 24V6.25A, etc.) to charge. If you have insufficient confidence in the performance of the charger, please set the input current limit reasonably.

Ensure that there are defects, scratches, dust, bumps, slightly skewed screen, etc., pure manual assembly, mind shooting carefully

Terminator 13 mobile power product introduction:

①. High-power DC200W adjustable power output, can charge most notebooks and even gaming notebooks, output 3-25V constant voltage, 0.5-12A constant current arbitrary adjustment, perfect over-current short-circuit protection, can be used as an adjustable power supply, board 96%+ ultra-high efficiency @100W output.

② High-power DC150W charging input, ultra-fast charging speed, it only takes 90 minutes to charge a large cup of 40,000 mah, 96W self-charge for 11 minutes or 150W self-charge for 7 minutes, you can charge the total capacity of a 4500mAh mobile phone. Input supports constant current CC, constant voltage CV, undervoltage shutdown V-OFF mode, supports 5-150W DC power charging, supports PD or QC charging, automatically detects charging power, can also be used as an electronic load, supports solar MPPT automatic power tracking .

③Hardware high-precision Texas Instruments coulomb counter, non-software simulation, external high-power active equalization, true capacity percentage display with a resolution of 0.1%, automatic learning capacity, and giving battery cycle times, attenuation ratio, single battery voltage, Detailed parameters such as the internal resistance of a single battery are convenient for checking battery performance.

④. Two-way PD-100W input and output, innovation can set broadcast PDO and constant voltage and constant current bias arbitrarily, allowing mobile phones or laptops to apply for the best gear, and support for flashing to upgrade more protocols.

⑤ SuperV00C+40wSSCP rare fast charge protocol output.

⑥ Full blood 3-21V 5A PPS output, support PPS fast charge such as Samsung and Xiaomi, genuine authorized V00C+SCP output, support old one plus OPPO wow fast charge.

⑦, 1.14 inch IPS high-definition dot matrix color screen, simple, traditional, English and trilingual fonts, multi-function setting menu, DIY boot screen, clear parameter display and settings.

⑧, 4 strings of active equalization hardware protection circuits, active equalization throughout the charging process, up to 4 temperature sensors, to ensure that the temperature of the battery and the motherboard does not exceed the limit. Exceeding the temperature will not directly protect the charging from stopping, but linearly reduce the charging current or output current under the premise of constant temperature, which is more humane.

⑨, thickened aluminum alloy anodized high-strength industrial-style shell, sports car SUV? No problem with light truck rolling! Thick anti-scratch embedded LCD screen protection board, stainless steel hexagon socket screws, glass fiber anti-drop panel, heat dissipation, feel, and durability are far ahead of similar products in all aspects.

⑩. Quadruple insulation of battery, battery overcharge, battery overdischarge, battery short circuit, battery overcurrent, battery overheating, battery overcooling, battery imbalance, motherboard overheating, output overvoltage, output undervoltage, output short circuit, CC short circuit to VBUS, the charger is plugged into the wrong port, and the MCU crashes, all are protected, and safety is not a blow.

If you want to know more, please contact the owner.

It is recommended to set to 15V5-10A reverse output. Charge it for 5 minutes to try to start. Please disconnect the battery clamp when starting. Don’t connect it backwards, otherwise the steel 11 will explode in situ.

6 years of research and development, more than 20 times of proofing and sample welding, more than 2 years of continuous stability testing, from that year there was no PD mouth, the name was still steel 9, and it was gradually upgraded to the present. Why is it called steel 11 instead of steel 13, and steel 9 steel xs steel 12 are all released. Only steel 11 has not been verified in that year, so this plan has not been verified, only a steel 8V make up.
6 years ago: QC to PD, DC to PD lossless version, PD decoy, etc., to verify the stability of ON Semiconductor’s PD interface IC,
5 years ago: Single function module steel plug, ZC826, verified original IP2716+SC8x02 bidirectional PD stability,
4 years ago: Pre-laying the model steel XS, verifying the stability of the BQ3060 coulomb counter and the coordination of the above systems,
3 years ago: Single-function research and development of SW351x series protocol IC, main experiment SW3518S with MCU use function development,
2 years ago: Single-function module ZC855, verified that SuperVOOC2.0 was realized based on pure CNC power supply,
1 year ago: Terminator 11 mass production.

The kit assembly tutorial refers to the similarities of the steel XS, the picture borrows the steel XS, and the actual steel 13 kit.
The kit includes: motherboard, display board, panel, back panel, protective window, upper and lower aluminum casing, battery heat shrinkable film, equalization wire, thermistor (welded, recommended to remove before assembly), thermal paste (installed), long Insulation paper*4, short insulation paper*4, positive insulation paper*4, long nickel tape*3, short nickel tape*2, stainless steel screws*10 (8 pieces of panel back plate screwed on the shell when shipped), silicone key Cap*4.
To complete the assembly, you need to prepare a number of double-sided foam tapes with thickness of 1mm and 2mm, H2 hexagon socket screwdriver, electric soldering iron, solder wire, flux, hair dryer or hot air grab, etc.

Note that the blue wire thermistor is soldered on the motherboard to test the motherboard function when it is shipped. It is recommended to remove it and stick it on the battery according to the tutorial, and then solder it back to the motherboard after the last step. When installing the display board and the main board, it is recommended to pull a little convex and then slide it in to avoid scratches on the shell due to the screen or thermal conductive glue. It is recommended that the two sides of the main board display board be fixed on the shell with B7000 and other point drill glue to avoid sliding. Put the thermal paste on the back of the motherboard and between the exposed copper area and the shell. It is recommended to put half of it.